Download Now
360 USB2.0 [email protected] 1.0 Driver

Imaging Devices - Trust International BV - Trust USB SpaceCam Computer Driver Updates Driver Version, USB [email protected] #2. TRUST Z [email protected] OPTZOOM with high 31 Megapixel sensor USB [email protected] · Trust LCD [email protected] ZOOM, Webcam mode. links, documents Camera Q-TEC Webcam USB Trust [email protected] (Use SANE-Backens or higher) placed in backend directory: mx.c.


Type: Driver
166 (4.03)
Downloads: 729
File Size: 9.64Mb
Supported systems: Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5
Price: Free* [*Free Registration Required]

Download Now
360 USB2.0 [email protected] 1.0 Driver


Bluetooth that works connected directly to the Raspberry Pi triggers the error. This one consists also of two 05e3: The power supply is rated at 5 V 2 A. It kills Ethernet when X11 is started. Chip inside is a GLG, lsusb identification is 05e3: I did not test whether the hub feeds power into the uplink USB port.

Sometimes they reconnect with a different device, sometimes they do not. The only error messages in the logs are plain vanilla USB device disconnects.

While this may look like a power-issue, measurements with a digital oscilloscope found absolutely no problem. I suspect this is a problem with the USB driver that does not manage to work around some brokeness in the hub chip.

USB Driver free camera Jpeg

The hub has no current-limiter at all and plugging in some peripherals 360 USB2.0 [email protected] 1.0 hard crash your Raspberry Pi, something I do not observe with better hubs. Appears to result in significant slow downs when the USB is under load, such as running the root file system from a USB drive. Dynamode 7-Port USB 2. The Raspberry Pi also fails to boot when powered off this hub, with or without the interconnect plugged in.

Stops the network from working when connected to the Raspberry Pi after booting the Raspberry Pi - cannot ssh to the Raspberry Pi. Best avoided.

Trust 360 USB 2.0 [email protected] Driver Download and Update for Windows

This hub also appears unable to power an external USB drive using a y-cable as it gives the error message in dmesg when providing external power to the Raspberry Pi. Leaks power to the Raspberry Pi through the uplink. Doesn't work with 360 USB2.0 [email protected] 1.0 Pi, unless the Raspberry Pi is powered by a second power source. This hub is completely generic and I've seen it being sold under different brand names as well.

Therefore, a picture is included for easy identification. Internally, two daisy-chained Genesys Logic 05e3: Causes Ethernet instability when used under very specific circumstances, in X UHT 4-port powered hub.

Driver Updates

As of Wheezy, if any USB 1. Occurs even if power is not attached not a power leakage 360 USB2.0 [email protected] 1.0. Also, turned out to be somewhat more specific to the combination of two particular low-speed devices. Hama 4-Port USB 2. Only works for low power devices card readers?


It doesn't boot when hub connected to Raspberry Pi. The funniest thing is that Raspberry Pi powers on when I plug in this hub to normal size USB port not that small dedicated port.


Listed in lsusb as Genesys Logic. Fails to deliver enough power to connected devices even when using AC power supply.

Inland 4-Port USB 2. Ethernet failed, slow response, in LXDE. Happened whether or not the hub's independent power supply was connected to the hub. Does not work even with a x86 Linux box. Does not work when more than 1 device is plugged in even with power supply.

AH USB Dual Flash Drive Apacer 宇瞻科技

Model number CUH Appears to draw power away from the Raspberry Pi, even when the Raspberry Pi has an isolated power line. Also sometimes smsc95xx eth0 Failed to read register index 0x etc. Trust port USB 2. Prevents Ethernet from being recognised. 360 USB2.0 [email protected] 1.0 Karaoke by Smule. If you are using an older computer model e.

Other Drivers